Question 1

What are the wattage settings on my Delonghi oil Filled heater

Accepted Answer

The wattage range for the Delonghi range of oil heaters are: Model High Medium Low TRD42400ET 2250-2400W 1400W 1000W TRD41500ET 1400-1500W 800W 700W TRD42400MT 2250-2400W 1400W 1000W TRD41500MT 1400 - 1500W 800W 700W TRD41200MT 1100-1200W 650W 550W TRRS1224T 2000-2400W 1400W 1000W TRRS0920T 1700W-2000W 1075W 925W TRRS0715T 1300-1500W 800W 700W TRRS0510T 800-1000W DL2401TF 1900W 1075W 825W 500W With Fan V551224T 2400W 1600W 900W V550920T 2000W 1100W 900W V550715T 1500W 800W 700W

Question 2

What does the "Fu" error code mean on my Dragon 5 Connect, and how can I fix it?

Accepted Answer

The "Fu" code on your display usually indicates a connection or pairing error between your device and the app. Don't worry&mdash;it is easy to reset! Please follow these simple steps to clear the code and reconnect: Power Down: Completely unplug the Dragon5 Connect from the electrical outlet. Wait a Moment: Leave the unit unplugged for about 30 seconds to allow the internal electronics to reset. Restore Power: Plug the device back into the wall socket. Restart Pairing: Open your app and follow the standard "pairing" instructions to link your device again. If the "Fu" code persists after these steps, a professional repair may be required to resolve the technical issue. Please contact our support team for further assistance.

Question 3

I am having trouble setting or saving a schedule for my Dragon 5 Connect. What should I do?

Accepted Answer

If you encounter any difficulties when configuring your appliance's schedule, a quick refresh of the system and the app usually resolves the issue. Please follow these steps: Reset the connection: Unplug your Dragon5 Connect from the electrical outlet and wait for 30 seconds before plugging it back in and switching it on. Check the Wi-Fi: Ensure the Wi-Fi is active on the unit. If the indicator is off, simply press the Wi-Fi button on the front panel of the appliance. Refresh the App: Close the app on your smartphone and wait 3 minutes to allow the appliance and the app to sync properly. Clear previous settings: Within the app, delete all existing schedules. Set a new schedule: Create your desired schedule from scratch and make sure to enable it. Reconnect if needed: If the scheduling still doesn't apply, please try the pairing procedure again to establish a fresh connection between your phone and the appliance. If these steps do not resolve the issue, a professional repair might be necessary. Please contact our support team for further assistance.

Oil heater